100W Pulse Peak Power Single-Frequency Pulsed EDFA Module With PM1550 Fiber EDFA-SFPL-1550-100-PM-M
The single-frequency pulse erbium-doped fiber amplifier is a fiber amplifier dedicated to narrow linewidth single-frequency nanosecond pulses. The spectral linewidth of the input laser pulse can be as low as the kHz level. It can effectively suppress nonlinear effects while achieving high pulse energy output. Mode or polarization maintaining fiber output. Can be used in distributed sensing, Doppler lidar and other applications.
[Features]
Broad wavelength range
High gain factor
Suppress non-linearity
[Application]
Doppler lidar
Fiber optic distributed sensing
Optical fiber laser
[Specifications]
|
Parameters
|
Unit
|
Typical Value
|
Remarks
|
|
Model
|
--
|
EDFA-SFPL-1550-100-PM-M
|
|
|
Wavelengthe Range
|
nm
|
1540~1560
|
|
|
Pulse Width
|
ns
|
10~200
|
|
|
Pulse Frequency
|
kHz
|
5~20
|
|
|
Input Pulse Peak Power
|
mW
|
10~50
|
|
|
Output Pulse Peak Power
|
W
|
100
|
|
|
Output Light Single Pulse Energy
|
uJ
|
10~20
|
@200ns,10kHz
|
|
Input/Output Isolation
|
dB
|
>35
|
|
|
Pigtail Type
|
--
|
PM1550 fiber
|
FC/APC
|
|
Working Mode
|
--
|
Automatic current control (ACC)
|
|
*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
|
Electrical and environmental parameters
|
Module Type
|
|
Control method
|
RS232 Serial communication
|
|
Communication interface
|
DB9 Female
|
|
Power supply
|
DC 12V, ≤15W
|
|
Size
|
125(W)×150(D)×20(H)mm
|
|
Operating temperature range
|
-5~+35°C
|
|
Operating humidity range
|
0~70%
|
Latest Product Image(Updated on October 22, 2024):
.jpg)
.jpg)
Follow us on Twitter
Facebook page
CivilLaser YouTube