L-Band 40dBm High Power PM Fiber Amplifier EDFA Benchtop EYDFA-L-HP-BA-40-PM-B
The high-power polarization-maintaining erbium-doped fiber amplifier is based on the principle of laser amplification of optical signals in erbium-doped fiber. It adopts efficient polarization-maintaining fiber optical amplification design and high-power laser heat dissipation process to achieve high-power polarization-maintaining output of 1570~1605nm wavelength laser. . It has the advantages of high power, high extinction ratio, and low noise, and can be used in optical fiber communications, laser radar, etc.
[Features]
High output power .
High gain factor.
Full polarization maintaining path.
[Applications]
Fiber communication
Fiber optic sensing
Lidar
[Specification]
|
Parameters
|
Unit
|
Typical Value
|
Remarks
|
|
Model
|
--
|
EYDFA-L-HP-BA-40-PM-B
|
|
|
Wavelength Range
|
nm
|
1570~1605
|
L-band
|
|
Input Power
|
dBm
|
-6~+10
|
|
|
Saturated Output Power
|
dBm
|
40
|
@0dBm input
|
| Output Power Adjustable Range |
-- |
10%~100%
|
|
|
Noise Figure
|
dB
|
<6.0
|
@0dBm input
|
|
Polarization Extinction Ratio
|
dB
|
23(Type)，20(Min)
|
|
|
Input/Output Isolation
|
dB
|
>35
|
|
|
Optical Power Monitoring
|
--
|
Input, output optical power monitoring
|
|
|
Pigtail Fiber Type
|
--
|
PM1550 polarization-maintaining fiber
|
L=1m
|
|
Fiber Interface Type
|
--
|
FC/APC
|
|
|
Work Mode
|
--
|
ACC / APC
|
*Note1
|
|
Electrical and environmental parameters
|
DeskTop Type
(Current product)
|
Module Type
|
|
Control Method
|
Button
|
RS232 Serial communication
|
|
Communication Interface
|
DB9 Female
(Default not include)
|
DB9 Female
|
|
Power Supply
|
AC 100~240V
|
DC 12V, 13A
|
|
Size
|
376(W)×340(D)×112(H)mm
|
139(W)×235(D)×70(H)mm
|
|
Operating Temperature Range
|
-5~+35°C
|
|
Operating Humidity Range
|
0~70%
|
*Note1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
.jpg)
.jpg)
.jpg)
.jpg)
Follow us on Twitter
Facebook page
CivilLaser YouTube