10mJ~600J 350nm~2500nm Pulsed Laser Energy Meter For Laser Hair Removal
This IPL & Diode Laser Energy Meter can be used to measure the emitted energy of laser hair removal. It is very easy to operate.
Instructions:
1. Connect the other end of the signal wire probe BNC with the LCD digital display header.
2.Trigger the light pulse to aim at the center of the absorber.
3. The LCD digital display header will show the real-time energy and the maximum energy(J).
After resetting, you can measure repeatedly many times.
[Specification]
Parameters |
Value |
Model |
YLE-3000-600J |
Wavelength Range |
350nm~2500nm |
Laser Energy Measuring Range |
10mJ~600J |
Detector’s Receiving Aperture Size |
65x25mm / 68x68mm |
Measurement Uncertainty |
<5% |
Applicability |
IPL,808nm intense pulse laser etc. |
Resolution |
0.1mJ |
Response Time |
3~5s |
Cooling Mode |
Air cooling |
Power Dissipation |
<10W |
Interface Type |
BNC |
Size |
Display meter: 162(L)*96(W)*45(H)mm
Probe - type1: 90(L)*60(W)*30(H)mm
Probe - type2: 80(L)*30(W)*80(H)mm |
Warranty |
1 Year |